KP 100 RAIL

HD hose, compact, RAIL

  • Image_1 Image_1

Properties

Application area Rail vehicles
Inner layer oil resistant synthetic rubber
Insert one high tensile steel wire braided insert
Media Mineral oil
Polyglycol based oil
Water (0°C to + 85°C)
Outer layer oil-resistant, synthetic rubber; flame retardant
Standard EN 857 1 SC
EN 45545-2
Temp. max. 100 °C
Temp. min. -40 °C
Temp. range Air ( max. 75 °C )

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm DN* Test pressure bar Operating pressure bar Inches Ø Insert nom. mm Burst pressure bar Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm DN* Test pressure bar Operating pressure bar Inches Ø Insert nom. mm Burst pressure bar Size Min. bending radius mm
KP 108 RAIL 14.5 7.9 8 430 215 5/16" 12.1 860 5 55
KP 110 RAIL 16.9 9.5 10 360 180 3/8" 14.5 720 6 65
KP 113 RAIL 20.4 12.7 12 320 160 1/2" 18.1 640 8 90
KP 116 RAIL 23.0 15.9 16 260 130 5/8" 21.0 520 10 100
KP 120 RAIL 26.7 19.0 19 210 105 3/4" 24.4 420 12 120
KP 125 RAIL 34.9 25.4 25 176 88 1" 31.9 352 16 150
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.