KP 200 NO (2SC)

Compact hose


Properties

Outer layer synthetic rubber with high ozone, abrasion, and weather resistance
Insert two high-tensile steel wire braids
Application Medium pressure circuits with restricted installation spaces and extreme environmental conditions
Colour black
Inner layer oil resistant synthetic rubber
Elongation + 2 % to - 4 %
Standard EN 857 2 SC

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
KP 206 NO 6 4 1/4" 6,4 14,0 400,0 800 1600 75
KP 208 NO 8 5 5/16" 7,9 15,6 350,0 700 1400 85
KP 210 NO 10 6 3/8" 9,5 17,8 330,0 660 1320 90
KP 213 NO 12 8 1/2" 12,7 21,3 275,0 550 1100 130
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.