KP 400

Compact hose

  • Image_1 Image_1

Properties

Application area Medium and high pressure circuit with restricted installation space
Colour black
Inner layer oil resistant synthetic rubber
Insert four maximum strength steel wire spiral layers
Media Mineral oil
Mineral oil
Water-glycol emulsions
Water (0°C to + 70°C)
Outer layer synthetic rubber with high ozone, abrasion, and weather resistance
Standard EN 856 R12
Temp. max. 121 °C
Temp. min. -40 °C

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm DN* Test pressure bar Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm DN* Test pressure bar Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
KP 410 20.3 9.5 10 560 280 3/8" 1120 6 65
KP 413 23.8 12.7 12 560 280 1/2" 1120 8 90
KP 416 27.4 15.9 16 560 280 5/8" 1120 10 100
KP 420 30.7 19.0 19 560 280 3/4" 1120 12 120
KP 425 38.0 25.4 25 560 280 1" 1120 16 155
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.