KP 600

Compact hose

  • Image_1 Image_1

Properties

Colour black
Inner layer oil resistant synthetic rubber
Insert four maximum strength steel wire spiral layers
Media Mineral oil
Mineral oil
Water-glycol emulsions
Water (0°C to + 70°C)
Outer layer flame-retardant to MSHA
synthetic rubber with high ozone, abrasion, and weather resistance
Special features exceptionally flexible
narrow bending radius
abrasion and ozone resistant, weatherproof
Standard ISO 18752-CCT
Temp. max. 121 °C
Temp. min. -40 °C
impulse test Tested with 500,000 pulses in accordance with ISO 6803:2008

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm DN* Test pressure bar Operating pressure bar Inches Weight / meter kg Burst pressure bar Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm DN* Test pressure bar Operating pressure bar Inches Weight / meter kg Burst pressure bar Size Min. bending radius mm
KP 610 20.2 9.9 10 840 420 3/8" 0.70 1680 6 65
KP 613 22.9 13.0 12 840 420 1/2" 0.85 1680 8 90
KP 616 26.5 16.4 16 840 420 5/8" 1.04 1680 10 100
KP 620 30.5 19.5 19 760 380 3/4" 1.43 1520 12 120
KP 625 37.9 26.0 25 700 350 1" 2.20 1400 16 150
KP 632 45.9 32.5 31 700 350 1.1/4" 2.58 1400 20 280
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.