KS AL

Clamp ring fitting, aluminium



Properties

Design Clamping shells
Application Integrating clamp ring fittings with hose
Scope of supply Clamping halves, loose, incl. screws and nuts
Standard DIN 2817
Material Aluminium, forged

Article Table

Product Name for hose Clamping range (mm) DN* Max. working pressure bar b mm h mm Screws
Product Name for hose Clamping range (mm) DN* Max. working pressure bar b mm h mm Screws
KS 22-24 AL 13 x 5 22 - 24 19 25 51 50 (4 x) M 6 x 20
KS 30-33 AL 19 x 6 30 - 33 20 25 63 50 (4 x) M 6 x 20
KS 34-36 AL 25 x 5 - 25 25 70 64 (4 x) M 8 x 25
KS 36-39 AL 25 x 6 36 - 39 25 25 69 50 (4 x) M 6 x 20
KS 40-43 AL 25 x 8 40 - 43 25 25 73 50 (4 x) M 6 x 20
KS 43-46 AL 32 x 6 43 - 46 32 25 76 50 (4 x) M 6 x 20
KS 47-51 AL 38 x 5 47 - 51 40 25 79 50 (4 x) M 6 x 20
KS 50-53 AL 38 x 6.5 50 - 53 40 25 83 50 (4 x) M 6 x 20
KS 53-56 AL 38 x 8 53 - 56 40 25 85 50 (4 x) M 6 x 20
KS 58-61 AL 40 x 10 - 40 25 98 57 (4 x) M 8 x 25
KS 60-64 AL 50 x 5.5 60 - 64 51 25 95 56 (4 x) M 8 x 25
KS 63-67 AL 50 x 8 63 - 67 51 25 102 56 (4 x) M 8 x 25
KS 74-77 AL 63 x 6 74 - 77 63 25 120 74 (4 x) M 10 x 40
KS 78-82 AL 63 x 8 78 - 82 63 25 120 74 (4 x) M 8 x 25
KS 85-89 AL 75 x 6 - 76 25 141 102 (4 x) M 10 x 40
KS 89-93 AL 75 x 8 89 - 93 76 25 132 76 (4 x) M 8 x 25
KS 94-97 AL 75 x 10 94 - 97 76 25 140 76 (4 x) M 8 x 25
KS 111-115 AL 100 x 6.5 111 - 115 100 25 - 120 -
KS 114-119 AL 100 x 8 114 - 119 100 25 166 120 (4 x) M 10 x 40
KS 118-122 AL 100 x 10 118 - 122 100 25 170 120 (4 x) M 10 x 40
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.