KT MM

Conical nozzle

  • Image_1 Image_1

Properties

Application area in construction, mining and tunnel building
Connection 1 Sealing cone
Connection 2 Hose connection
Material Steel
Media Compressed air
Water
Sealing form 1 Outer cone
Standard DIN 8537 / 20 033
Surface electro galvanised
Temp. max. 95 °C
Temp. min. -40 °C

Hints

The conical nozzles are without a safety collar
KT19MM-PH for hydraulic pressing with press sleeve.
Conical nozzles 1:3 cone generally with additional O-ring seal.

Article Table

Product Name for hose ID mm b mm Operating pressure Cone Length mm
Product Name for hose ID mm b mm Operating pressure Cone Length mm
KT 10 MM 10 28 PN 25 1:3 78
KT 10 MM-2 10 24 PN 25 1:4 70
KT 13 MM 13 28 PN 25 1:3 80
KT 13 MM-2 13 24 PN 25 1:4 79
KT 15 MM 15 28 PN 25 1:3 80
KT 15 MM-2 15 24 PN 25 1:4 79
KT 19 MM 19 28 PN 25 1:3 80
KT 19 MM-2 19 24 PN 25 1:4 80
KT 19 MM-PH 19 28 PN 25 1:3 80
KT 25 MM 25 33 PN 25 1:3 90
KT 25 MM-2 25 30 PN 25 1:3 85
KT 25 MM-3 25 29 PN 25 1:3 85
KT 32 MM 32 40 PN 25 1:3 120
KT 35 MM 35 35 PN 25 1:3 125
KT 38 MM 38 48 PN 25 1:3 125
KT 42 MM 42 57 PN 25 1:3 130
KT 50 MM 50 68 PN 25 1:3 140
KT 53 MM 53 68 PN 25 1:3 140
KT 75 MM 75 98 PN 25 1:3 189

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.