KT UEM RD

Conical nozzle with union nut

  • Image_1 Image_1

Properties

Application area in construction, mining and tunnel building
Connection 1 Rund nut thread
Connection 2 Hose connection
Material Steel
Malleable iron
Media Compressed air
Water
Scope of supply Union nut and conical nozzle
Standard DIN 8537 / 20 033
Surface electro galvanised
Temp. max. 95 °C
Temp. min. -40 °C

Hints

To be integrated with DIN 20039 B hose clamps.
Conical nozzles 1:3 cone generally with additional O-ring seal.

Article Table

Product Name for hose ID mm b mm Ø ID mm Operating pressure Ø Safety collar mm G1 Cone Length mm
Product Name for hose ID mm b mm Ø ID mm Operating pressure Ø Safety collar mm G1 Cone Length mm
KT UEM RD32-10 MM 10 65 7.50 PN 25 21 Rd 32 x 1/8" 1:3 90
KT UEM RD32-13 MM 13 65 10.00 PN 25 22 Rd 32 x 1/8" 1:3 83
KT UEM RD32-15 MM 15 65 12.00 PN 25 26 Rd 32 x 1/8" 1:3 85
KT UEM RD32-19 MM 19 65 15.00 PN 25 33 Rd 32 x 1/8" 1:3 85
KT UEM RD32-25 MM 25 65 16.00 PN 25 38 Rd 32 x 1/8" 1:3 90
KT UEM RD38-25 MM 25 76 19.00 PN 25 38 Rd 38 x 1/8" 1:3 98
KT UEM RD46-32 MM 32 86 25.00 PN 25 50 Rd 46 x 1/6" 1:3 124
KT UEM RD55-35 MM 35 95 30.00 PN 25 55 Rd 55 x 1/6" 1:3 131
KT UEM RD55-38 MM 38 95 31.00 PN 25 55 Rd 55 x 1/6" 1:3 131
KT UEM RD62-42 MM 42 105 35.00 PN 25 63 Rd 62 x 1/6" 1:3 139
KT UEM RD75-50 MM 50 137 45.00 PN 25 77 Rd 75 x 1/6" 1:3 149
KT UEM RD75-53 MM 53 137 45.00 PN 25 77 Rd 75 x 1/6" 1:3 149
KT UEM RD105-75 MM 75 158 67.00 PN 25 110 Rd 105 x 1/4" 1:3 206
G1 = Thread of connection 1
Ø ID = Through hole

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.