L HMO HJ

Screw-in socket, L shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 + 3 UN/UNF external threads
Construction L shaped
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 + 3 74° outer cone
Surface electro galvanised

Article Table

Product Name S1 OR AF mm G1 G2 + G3
Product Name S1 OR AF mm G1 G2 + G3
L HMO 10 HJ 04 13 8.2 x 1.5 11 M 10 x 1 7/16"-20 UNF
L HMO 10 HJ 05 14 8.2 x 1.5 13 M 10 x 1 1/2"-20 UNF
L HMO 12 HJ 04 17 9.4 x 2.1 13 M 12 x 1,5 7/16"-20 UNF
L HMO 12 HJ 05 17 9.4 x 2.1 13 M 12 x 1,5 1/2"-20 UNF
L HMO 14 HJ 06 19 11.4 x 2.1 14 M 14 x 1.5 9/16"-18 UNF
L HMO 16 HJ 06 22 13.4 x 2.1 19 M 16 x 1.5 9/16"-18 UNF
L HMO 16 HJ 08 22 13.4 x 2.1 19 M 16 x 1.5 3/4" -16 UNF
L HMO 18 HJ 08 24 15.4 x 2.1 19 M 18 x 1.5 3/4" -16 UNF
L HMO 18 HJ 10 24 15.4 x 2.1 22 M 18 x 1.5 7/8" -14 UNF
L HMO 22 HJ 10 27 19.4 x 2.1 22 M 22 x 1.5 7/8" -14 UNF
L HMO 22 HJ 12 27 19.4 x 2.1 27 M 22 x 1.5 1.1/16" -12 UN
L HMO 27 HJ 12 32 23.7 x 2.8 27 M 27 x 2 1.1/16" -12 UN
L HMO 27 HJ 16 32 23.7 x 2.8 27 M 27 x 2 1.5/16" -12 UN
L HMO 33 HJ 16 41 29.7 x 2.8 33 M 33 x 2 1.5/16" -12 UN
L HMO 42 HJ 20 50 38.7 x 2.8 41 M 42 x 2 1.5/8" -12 UN
L HMO 48 HJ 24 55 46.7 x 2.8 48 M 48 x 2 1.7/8" -12 UN
SW, S1, S2, S3 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.