L HMO HJOF

Screw-in socket, L shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 + 3 ORFS external threads
Construction L shaped
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 + 3 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name S1 AF mm G1 G2 + G3 OR1 OR2 + OR3
Product Name S1 AF mm G1 G2 + G3 OR1 OR2 + OR3
L HMO 12 HJOF 04 17 14 M 12 x 1,5 9/16"-18 UNF 8.2 x 1.5 7.65 x 1.78
L HMO 16 HJOF 06 22 19 M 16 x 1.5 11/16" -16 UN 13.4 x 2.1 9.25 x 1.78
L HMO 18 HJOF 08 24 19 M 18 x 1.5 13/16" -16 UN 15.4 x 2.1 12.42 x 1.78
L HMO 22 HJOF 10 27 27 M 22 x 1.5 1" -14 UNS 19.4 x 2.1 15.60 x 1.78
L HMO 27 HJOF 12 32 30 M 27 x 2 1.3/16" -12 UN 23.7 x 2.8 18.77 x 1.78
L HMO 33 HJOF 16 41 36 M 33 x 2 1.7/16" -12 UN 29.7 x 2.8 23.52 x 1.78
L HMO 42 HJOF 20 50 41 M 42 x 2 1.11/16" -12 UN 38.7 x 2.8 29.87 x 1.78
L HMO 48 HJOF 24 55 48 M 48 x 2 2" -12 UN 46.7 x 2.8 37.82 x 1.78
SW, S1, S2, S3 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.