L HMOK HB

Screw-in socket, L shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 + 3 BSP cylindrical external threads
Construction L shaped
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 O-ring and spacer diaphragm ring
Sealing form 2 + 3 60° inner cone
Surface electro galvanised

Article Table

Product Name S1 OR AF mm G1 G2 + G3
Product Name S1 OR AF mm G1 G2 + G3
L HMOK 12 HB 02 18 9.3 x 2.4 13 M 12 x 1,5 G 1/8" -28
L HMOK 12 HB 04 18 9.3 x 2.4 14 M 12 x 1,5 G 1/4" -19
L HMOK 14 HB 04 20 11.3 x 2.4 14 M 14 x 1.5 G 1/4" -19
L HMOK 14 HB 06 20 11.3 x 2.4 19 M 14 x 1.5 G 3/8" -19
L HMOK 16 HB 04 22 13.3 x 2.4 19 M 16 x 1.5 G 1/4" -19
L HMOK 16 HB 06 22 13.3 x 2.4 19 M 16 x 1.5 G 3/8" -19
L HMOK 18 HB 06 24 15.3 x 2.4 22 M 18 x 1.5 G 3/8" -19
L HMOK 18 HB 08 24 15.3 x 2.4 22 M 18 x 1.5 G 1/2" -14
L HMOK 20 HB 08 28 17.3 x 2.4 22 M 20 x 1.5 G 1/2" -14
L HMOK 22 HB 08 28 19.3 x 2.4 22 M 22 x 1.5 G 1/2" -14
L HMOK 22 HB 12 28 19.3 x 2.4 27 M 22 x 1.5 G 3/4" -14
SW, S1, S2, S3 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.