L HMOK HJ

Screw-in socket, L shaped



Properties

Connection 1 metric cylindrical outer thread
Connection 2 + 3 UN/UNF external threads
Design Adjustable direction screw-in socket
Construction L shaped
Sealing form 1 Thread socket with O-ring + spacer diaphragm ring
Sealing form 2 + 3 74° outer cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 + G3 AF mm S1 OR
Product Name G1 G2 + G3 AF mm S1 OR
L HMOK 10 HJ 04 M 10 x 1 7/16"-20 UNF 11 13 8.00 x 1.50
L HMOK 10 HJ 05 M 10 x 1 1/2"-20 UNF 13 14 8.00 x 1.50
L HMOK 12 HJ 04 M 12 x 1.5 7/16"-20 UNF 17 14 9.25 x 1.78
L HMOK 12 HJ 05 M 12 x 1.5 1/2"-20 UNF 13 17 9.25 x 1.78
L HMOK 14 HJ 05 M 14 x 1.5 1/2"-20 UNF 14 17 10.82 x 1.78
L HMOK 14 HJ 06 M 14 x 1.5 9/16"-18 UNF 14 17 10.82 x 1.78
L HMOK 16 HJ 06 M 16 x 1.5 9/16"-18 UNF 19 17 13.46 x 2.08
L HMOK 16 HJ 08 M 16 x 1.5 3/4"-16 UNF 19 19 13.46 x 2.08
L HMOK 18 HJ 06 M 18 x 1.5 9/16"-18 UNF 19 17 15.54 x 2.62
L HMOK 18 HJ 08 M 18 x 1.5 3/4"-16 UNF 19 22 15.54 x 2.62
L HMOK 18 HJ 10 M 18 x 1.5 7/8"-14 UNF 22 24 15.54 x 2.62
L HMOK 22 HJ 10 M 22 x 1.5 7/8"-14 UNF 22 27 18.77 x 1.78
L HMOK 22 HJ 12 M 22 x 1.5 1.1/16" -12 UN 27 27 18.77 x 1.78
L HMOK 27 HJ 12 M 27 x 2 1.1/16" -12 UN 27 32 23.47 x 2.62
L HMOK 27 HJ 16 M 27 x 2 1.5/16" -12 UN 32 27 23.47 x 2.62
L HMOK 33 HJ 16 M 33 x 2 1.5/16" -12 UN 33 38 28.24 x 2.62
L HMOK 42 HJ 20 M 42 x 2 1.5/8" -12 UN 41 50 37.77 x 2.62
L HMOK 48 HJ 24 M 48 x 2 1.7/8" -12 UN 48 55 44.12 x 2.62
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.