L HRO HB

Screw-in socket, L shaped

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 BSP cylindrical external threads
Construction L shaped
Design Screw-in sockets
Material Steel
Online-Shop https://shop.hansa-flex.com/de/LHROHB
Sealing form 1 form G
Sealing form 2 + 3 60° inner cone
Surface electro galvanised

Article Table

Product Name S1 SW mm G1 G2 + G3 OR
Product Name S1 SW mm G1 G2 + G3 OR
LHRO02HB 16 11 mm G 1/8" -28 G 1/8" -28 7.65 x 1.78
LHRO04HB02 20 14 mm G 1/4" -19 G 1/8" -28 10.78 x 2.62
LHRO04HB 20 14 mm G 1/4" -19 G 1/4" -19 10.78 x 2.62
LHRO04HB06 20 19 mm G 1/4" -19 G 3/8" -19 10.78 x 2.62
LHRO06HB04 24 19 mm G 3/8" -19 G 1/4" -19 13.94 x 2.62
LHRO06HB 24 19 mm G 3/8" -19 G 3/8" -19 13.94 x 2.62
LHRO06HB08 24 22 mm G 3/8" -19 G 1/2" -14 13.94 x 2.62
LHRO08HB06 28 22 mm G 1/2" -14 G 3/8" -19 17.86 x 2.62
LHRO08HB 28 22 mm G 1/2" -14 G 1/2" -14 17.86 x 2.62
LHRO08HB10 28 22 mm G 1/2" -14 G 5/8" -14 17.86 x 2.62
LHRO08HB12 28 27 mm G 1/2" -14 G 3/4" -14 17.86 x 2.62
LHRO12HB08 35 27 mm G 3/4" -14 G 1/2" -14 23.47 x 2.62
LHRO12HB 35 27 mm G 3/4" -14 G 3/4" -14 23.47 x 2.62
LHRO12HB16 35 33 mm G 3/4" -14 G 1" -11 23.47 x 2.62
LHRO16HB12 43 33 mm G 1" -11 G 3/4" -14 29.74 x 3.53
LHRO16HB 43 33 mm G 1" -11 G 1" -11 29.74 x 3.53
LHRO20HB16 52 41 mm G 1.1/4" -11 G 1" -11 37.69 x 3.53
LHRO20HB 52 41 mm G 1.1/4" -11 G 1.1/4" -11 37.69 x 3.53
LHRO24HB 58 48 mm G 1.1/2" -11 G 1.1/2" -11 44.04 x 3.53
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.