L HRO HJ

Screw-in socket, L shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 UN/UNF external threads
Construction L shaped
Design Screw-in socket, straight
Material Steel
Sealing form 1 form G
Sealing form 2 + 3 74° outer cone
Surface electro galvanised

Article Table

Product Name S1 AF mm G1 G2 + G3 OR
Product Name S1 AF mm G1 G2 + G3 OR
L HRO 02 HJ 04 16 11 G 1/8" -28 7/16"-20 UNF 7.65 x 1.78
L HRO 02 HJ 05 16 14 G 1/8" -28 1/2"-20 UNF 7.65 x 1.78
L HRO 04 HJ 20 14 G 1/4" -19 7/16"-20 UNF 10.78 x 2.62
L HRO 04 HJ 05 20 14 G 1/4" -19 1/2"-20 UNF 10.78 x 2.62
L HRO 04 HJ 06 20 14 G 1/4" -19 9/16"-18 UNF 10.78 x 2.62
L HRO 04 HJ 08 20 19 G 1/4" -19 3/4" -16 UNF 10.78 x 2.62
L HRO 06 HJ 04 24 19 G 3/8" -19 7/16"-20 UNF 13.94 x 2.62
L HRO 06 HJ 05 24 19 G 3/8" -19 1/2"-20 UNF 13.94 x 2.62
L HRO 06 HJ 24 19 G 3/8" -19 9/16"-18 UNF 13.94 x 2.62
L HRO 06 HJ 08 24 19 G 3/8" -19 3/4" -16 UNF 13.94 x 2.62
L HRO 06 HJ 10 24 22 G 3/8" -19 7/8" -14 UNF 13.94 x 2.62
L HRO 08 HJ 06 28 22 G 1/2" -14 9/16"-18 UNF 17.86 x 2.62
L HRO 08 HJ 28 22 G 1/2" -14 3/4" -16 UNF 17.86 x 2.62
L HRO 08 HJ 10 28 22 G 1/2" -14 7/8" -14 UNF 17.86 x 2.62
L HRO 08 HJ 12 28 27 G 1/2" -14 1.1/16" -12 UN 17.86 x 2.62
L HRO 12 HJ 08 35 27 G 3/4" -14 3/4" -16 UNF 23.47 x 2.62
L HRO 12 HJ 35 27 G 3/4" -14 1.1/16" -12 UN 23.47 x 2.62
L HRO 12 HJ 10 35 27 G 3/4" -14 7/8" -14 UNF 23.47 x 2.62
L HRO 12 HJ 16 35 27 G 3/4" -14 1.5/16" -12 UN 23.47 x 2.62
L HRO 16 HJ 12 43 33 G 1" -11 1.1/16" -12 UN 29.74 x 3.53
L HRO 16 HJ 20 43 41 G 1" -11 1.5/8" -12 UN 29.74 x 3.53
L HRO 20 HJ 16 52 41 G 1.1/4" -11 1.5/16" -12 UN 37.69 x 3.53
L HRO 20 HJ 52 41 G 1.1/4" -11 1.5/8" -12 UN 37.69 x 3.53
L HRO 20 HJ 24 52 48 G 1.1/4" -11 1.7/8" -12 UN 37.69 x 3.53
L HRO 24 HJ 58 48 G 1.1/2" -11 1.7/8" -12 UN 44.04 x 3.53
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.