L O HJ

Screw-in socket, L shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 UN/UNF external threads
Connection 2 + 3 UN/UNF external threads
Construction L shaped
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 + 3 74° outer cone
Surface electro galvanised

Article Table

Product Name S1 AF mm G1 G2 + G3 OR
Product Name S1 AF mm G1 G2 + G3 OR
L O 04 HJ 14 11 7/16"-20 UNF 7/16"-20 UNF 8.92 x 1.83
L O 05 HJ 16 14 1/2"-20 UNF 1/2"-20 UNF 10.52 x 1.83
L O 06 HJ 17 14 9/16"-18 UNF 9/16"-18 UNF 15.40 x 2.10
L O 08 HJ 22 19 3/4" -16 UNF 3/4" -16 UNF 16.36 x 2.20
L O 08 HJ 06 22 19 3/4" -16 UNF 9/16"-18 UNF 16.36 x 2.20
L O 10 HJ 25 22 7/8" -14 UNF 7/8" -14 UNF 19.18 x 2.46
L O 10 HJ 12 25 27 7/8" -14 UNF 1.1/16" -12 UN 19.18 x 2.46
L O 12 HJ 32 27 1.1/16" -12 UN 1.1/16" -12 UN 23.47 x 2.95
L O 12 HJ 16 32 33 1.1/16" -12 UN 1.5/16" -12 UN 23.47 x 2.95
L O 16 HJ 38 33 1.5/16" -12 UN 1.5/16" -12 UN 29.74 x 2.95
L O 16 HJ 12 38 27 1.5/16" -12 UN 1.1/16" -12 UN 29.74 x 2.95
L O 20 HJ 48 41 1.5/8" -12 UN 1.5/8" -12 UN 37.47 x 3.00
L O 24 HJ 54 48 1.7/8" -12 UN 1.7/8" -12 UN 43.69 x 3.00
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.