MF MG

Sliding socket

  • Image_1 Image_1

Properties

Connection 1 + 2 BSP cylindrical internal threads
Material Brass OT 58, steel handle
Temp. max. 120 °C
Temp. min. 0 °C

Hints

The pressure figures are applicable for temperatures from 0 °C to +25 °C; at higher temperatures, pressure reductions must be taken into account.

Article Table

Product Name G1 + G2 DN* L mm Operating pressure bar Size
Product Name G1 + G2 DN* L mm Operating pressure bar Size
MF 06 MG G 1/4" -19 6 33 16.0 4
MF 10 MG G 3/8" -19 10 33 16.0 6
MF 13 MG G 1/2" -14 12 36 16.0 8
MF 20 MG G 3/4" -14 19 39 16.0 12
MF 25 MG G 1" -11 25 43 16.0 16
MF 32 MG G 1.1/4" -11 31 48 16.0 20
MF 40 MG G 1.1/2" -11 38 52 16.0 24
MF 50 MG G 2" -11 51 57 16.0 32
MF 65 MG G 2.1/2" -11 60 65 16.0 40
MF 75 MG G 3" -11 76 75 16.0 48
MF 100 MG G 4" -11 100 84 16.0 64
DN = Nominal diameter, nominal width
G1 + G2 = Threads of connections 1+2

Order hints

Other pressure and temperature figures available on request.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.