Pressure gauge connection fitting

  • Image_1 Image_1
  • Image_2 Image_2


Connection 1 BSP cylindrical internal threads
Connection 2 metric nut thread
Design Pressure gauge connection fitting
Material Brass
Scope of supply with edge sealing ring
Sealing form 1 Edge sealing ring
Sealing form 2 Pipe socket with cutting ring


Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name i mm L1 mm Operating pressure S1 AF mm G1 Series Ø d2 mm
Product Name i mm L1 mm Operating pressure S1 AF mm G1 Series Ø d2 mm
MVE NW 04 L MG 14.5 38.0 PN 400 14 19 G 1/4" -19 L 6
MVE NW 08 L MG 14.5 39.5 PN 400 19 19 G 1/4" -19 L 10
MVE NW 10 L MG 14.5 40.5 PN 400 22 19 G 1/4" -19 L 12
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø = External pipe diameter


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.