ND 100

Low pressure and plug-in hose

  • Image_1 Image_1

Properties

Application area Return hoses
Low pressure circuits (no pressure surge loads or critical applications)
Pneumatic controllers
Colour grey
Inner layer oil resistant synthetic rubber
Insert one braided textile insert
Media Mineral oil
Water-oil emulsions
Water (0°C to + 85°C)
Antifreeze solutions
Air (up to + 70°C)
Outer layer oil resistant and weatherproof synthetic rubber
Temp. max. 100 °C
Temp. min. -40 °C

Article Table

Product Name DN* Test pressure bar Operating pressure bar Inches External Ø min. mm Internal Ø max. mm Burst pressure bar Internal Ø min. mm Size Min. bending radius mm External Ø max. mm
Product Name DN* Test pressure bar Operating pressure bar Inches External Ø min. mm Internal Ø max. mm Burst pressure bar Internal Ø min. mm Size Min. bending radius mm External Ø max. mm
ND 106 6 42 17 1/4" 11.9 6.9 68 5.9 4 65 13.5
ND 110 10 42 17 3/8" 15.1 10.0 68 9.0 6 80 16.7
ND 113 12 42 17 1/2" 19.0 13.3 68 12.1 8 100 20.6
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.