ND 300 T

Low pressure and plug-in hose

  • Image_1 Image_1

Properties

Application area High temperature applications
Colour blue
Inner layer Synthetic PKR rubber
Insert High strength textile yarn braided insert
Media Liquids based on mineral oil and glycol
Antifreeze agent
Coolant
Lubricating oil
Luft (bis +100 °C)
Water (0°C to + 85°C)
Water-oil emulsions
Outer layer Synthetic PKR rubber
Temp. max. 150 °C
Temp. min. -48 °C

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm DN* Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm DN* Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
ND 306 T 12.7 6.3 Low pressure and plug-in hose 6 17 1/4" 68 4 65
ND 310 T 15.7 9.5 Low pressure and plug-in hose 10 17 3/8" 68 6 75
ND 313 T 19.8 12.7 Low pressure and plug-in hose 12 17 1/2" 68 8 130
ND 316 T 23.1 15.9 Low pressure and plug-in hose 16 17 5/8" 68 10 150
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.