ND HL

Plug-in nipple, CEL

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Material Steel
Sealing form 1 24° inner cone
Short code CEL
Standard ISO 8434-1
Surface electro galvanised

Hints

Unbeschädigte Nippel sind wiederverwendbar.

Article Table

Product Name L1 mm S1 G1 für Rohr-Außen-Ø mm Zoll DN Size
Product Name L1 mm S1 G1 für Rohr-Außen-Ø mm Zoll DN Size
ND06HL04 35.0 mm 12 M 12 x 1,5 6 mm 1/4" 6 4
ND06HL 36.0 mm 14 M 14 x 1.5 8 mm 1/4" 6 4
ND10HL08 41.5 mm 17 M 16 x 1.5 10 mm 3/8" 10 6
ND10HL 41.0 mm 19 M 18 x 1.5 12 mm 3/8" 10 6
ND13HL 49.0 mm 22 M 22 x 1.5 15 mm 1/2" 12 8
ND16HL 58.0 mm 27 M 26 x 1.5 18 mm 3/8" 16 10
ND20HL 63.0 mm 30 M 30 x 2 22 mm 3/4" 19 12
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.