NVM

Screw-in sockets



Properties

Connection 1 metric cylindrical outer thread
Connection 2 Pipe socket not pre-assembled
Design Screw-in sockets
Construction straight
Sealing form 1 Shape B
Sealing form 2 Cutting ring connection
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 2353, ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 i mm L mm AF mm
Product Name Series Operating pressure Ø d2 mm G1 i mm L mm AF mm
NVM NW 04 L L PN 315 6 M 10 x 1 8 32,5 14
NVM NW 06 L L PN 315 8 M 12 x 1.5 12 38,0 17
NVM NW 08 L L PN 315 10 M 14 x 1.5 12 39,5 19
NVM NW 10 L L PN 315 12 M 16 x 1.5 12 41,5 22
NVM NW 10 L 14 L PN 315 12 M 14 x 1.5 12 41,5 19
NVM NW 10 L 18 L PN 315 12 M 18 x 1.5 12 41,5 24
NVM NW 10 L 22 L PN 315 12 M 22 x 1.5 14 44,0 27
NVM NW 13 L L PN 315 15 M 18 x 1.5 12 43,5 27
NVM NW 13 L 22 L PN 315 15 M 22 x 1.5 17 48,0 27
NVM NW 16 L L PN 315 18 M 22 x 1.5 14 45,5 27
NVM NW 20 L L PN 160 22 M 26 x 1.5 16 48,5 32
NVM NW 25 L L PN 160 28 M 33 x 2 18 53,0 41
NVM NW 32 L L PN 160 35 M 42 x 2 20 62,5 50
NVM NW 40 L L PN 160 42 M 48 x 2 22 68,5 55
NVM NW 03 S S PN 400 6 M 12 x 1.5 12 39,0 17
NVM NW 04 S S PN 400 8 M 14 x 1.5 12 41,5 19
NVM NW 06 S S PN 400 10 M 16 x 1.5 12 44,0 22
NVM NW 08 S S PN 400 12 M 18 x 1.5 12 46,0 24
NVM NW 10 S S PN 400 14 M 20 x 1.5 14 50,0 27
NVM NW 13 S S PN 400 16 M 22 x 1.5 14 51,0 27
NVM NW 16 S S PN 400 20 M 27 x 2 16 59,0 32
NVM NW 20 S S PN 250 25 M 33 x 2 18 66,0 46
NVM NW 25 S S PN 160 30 M 42 x 2 20 51,0 50
NVM NW 32 S S PN 160 38 M 48 x 2 22 82,0 55
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.