NVM ED

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 Pipe socket not pre-assembled
Construction straight
Design Screw-in sockets
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Shape E
Sealing form 2 Cutting ring connection
Standard DIN 2353
ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name i mm Operating pressure External pipe Ø mm AF mm G1 Series Ø d2 mm L mm
Product Name i mm Operating pressure External pipe Ø mm AF mm G1 Series Ø d2 mm L mm
NVM NW 04 L ED 8 PN 315 6 14 M 10 x 1 L 6 32.5
NVM NW 06 L ED 12 PN 315 8 17 M 12 x 1,5 L 8 38.5
NVM NW 08 L ED 12 PN 315 10 19 M 16 x 1.5 L 10 39.5
NVM NW 10 L ED 12 PN 315 12 22 M 16 x 1.5 L 12 42.5
NVM NW 13 L ED 12 PN 315 15 24 M 18 x 1.5 L 15 43.5
NVM NW 16 L ED 14 PN 315 18 27 M 22 x 1.5 L 18 45.5
NVM NW 20 L ED 16 PN 160 22 32 M 26 x 1.5 L 22 48.5
NVM NW 25 L ED 18 PN 160 28 41 M 33 x 2 L 28 53.0
NVM NW 32 L ED 20 PN 160 35 50 M 42 x 2 L 35 62.5
NVM NW 40 L ED 22 PN 160 42 55 M 48 x 2 L 42 68.5
NVM NW 03 S ED 12 PN 630 6 17 M 12 x 1,5 S 6 39.0
NVM NW 04 S ED 12 PN 630 8 19 M 14 x 1.5 S 8 41.5
NVM NW 06 S ED 12 PN 630 10 22 M 16 x 1.5 S 10 44.0
NVM NW 08 S ED 12 PN 630 12 24 M 18 x 1.5 S 12 46.0
NVM NW 10 S ED 14 PN 630 14 27 M 20 x 1.5 S 14 50.5
NVM NW 13 S ED 14 PN 400 16 27 M 22 x 1.5 S 16 51.0
NVM NW 16 S ED 16 PN 400 20 32 M 27 x 2 S 20 59.0
NVM NW 20 S ED 18 PN 400 25 41 M 33 x 2 S 25 66.0
NVM NW 25 S ED 20 PN 400 30 50 M 42 x 2 S 30 71.0
NVM NW 32 S ED 22 PN 315 38 55 M 48 x 2 S 38 82.0
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.