NVM VA

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 Pipe socket not pre-assembled
Construction straight
Design Screw-in sockets
Lieferumfang Socket (without union nut and cutting ring)
Material Stainless steel
Sealing form 1 Shape B
Sealing form 2 Cutting ring connection
Standard DIN 2353, ISO 8434-1

Hints

Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen.

Article Table

Product Name i mm Betriebsdruck Rohr-Außen Ø mm SW mm G1 Baureihe Ø d2 mm L mm
Product Name i mm Betriebsdruck Rohr-Außen Ø mm SW mm G1 Baureihe Ø d2 mm L mm
NVMNW03SVA 12 mm PN 630 6 mm 17 mm M 12 x 1,5 S 6 mm 39.0 mm
NVMNW04SVA 12 mm PN 630 8 mm 19 mm M 14 x 1.5 S 8 mm 41.5 mm
NVMNW06SVA 12 mm PN 630 10 mm 22 mm M 16 x 1.5 S 10 mm 44.0 mm
NVMNW08SVA 12 mm PN 630 12 mm 24 mm M 18 x 1.5 S 12 mm 46.0 mm
NVMNW10SVA 14 mm PN 630 14 mm 27 mm M 20 x 1.5 S 14 mm 50.0 mm
NVMNW13SVA 14 mm PN 400 16 mm 27 mm M 22 x 1.5 S 16 mm 51.0 mm
NVMNW16SVA 16 mm PN 400 20 mm 32 mm M 27 x 2 S 20 mm 59.0 mm
NVMNW20SVA 18 mm PN 400 25 mm 46 mm M 33 x 2 S 25 mm 66.0 mm
NVMNW25SVA 20 mm PN 400 30 mm 50 mm M 42 x 2 S 30 mm 51.0 mm
NVMNW32SVA 22 mm PN 315 38 mm 55 mm M 48 x 2 S 38 mm 82.0 mm
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.