NVN

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT external threads
Connection 2 Pipe socket not pre-assembled
Construction straight
Design Screw-in sockets
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 thread seal
Sealing form 2 Cutting ring connection
Standard DIN 2353
ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name i mm Operating pressure External pipe Ø mm AF mm G1 Series Ø d2 mm L mm
Product Name i mm Operating pressure External pipe Ø mm AF mm G1 Series Ø d2 mm L mm
NVN NW 04 L 10.0 PN 315 6 11 1/8" -27 NPT L 6 33.0
NVN NW 06 L 15.0 PN 315 8 14 1/4" -18 NPT L 8 39.0
NVN NW 08 L 15.0 PN 315 10 14 1/4" -18 NPT L 10 40.0
NVN NW 10 L 15.0 PN 315 12 19 3/8" -18 NPT L 12 44.5
NVN NW 13 L 20.0 PN 315 15 22 1/2" -14 NPT L 15 48.0
NVN NW 16 L 20.0 PN 315 18 22 1/2" -14 NPT L 18 49.0
NVN NW 20 L 20.0 PN 160 22 27 3/4" -14 NPT L 22 49.0
NVN NW 25 L 25.0 PN 160 28 36 1" -11.5 NPT L 28 55.5
NVN NW 32 L 26.0 PN 160 35 46 1.1/4" -11.5 NPT L 35 63.0
NVN NW 40 L 26.0 PN 160 42 50 1.1/2" -11.5 NPT L 42 65.0
NVN NW 03 S 15.0 PN 630 6 14 1/4" -18 NPT S 6 40.0
NVN NW 04 S 15.0 PN 630 8 14 1/4" -18 NPT S 8 40.0
NVN NW 06 S 15.0 PN 630 10 19 3/8" -18 NPT S 10 44.0
NVN NW 08 S 15.0 PN 630 12 19 3/8" -18 NPT S 12 44.5
NVN NW 10 S 20.0 PN 630 14 22 1/2" -14 NPT S 14 53.5
NVN NW 13 S 20.0 PN 400 16 22 1/2" -14 NPT S 16 53.5
NVN NW 16 S 20.0 PN 400 20 27 3/4" -14 NPT S 20 58.0
NVN NW 20 S 25.0 PN 400 25 36 1" -11.5 NPT S 25 68.5
NVN NW 25 S 26.0 PN 400 30 46 1.1/4" -11.5 NPT S 30 73.5
NVN NW 32 S 26.0 PN 315 38 50 1.1/2" -11.5 NPT S 38 78.0
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.