NVR VA

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 Pipe socket not pre-assembled
Construction straight
Design Screw-in sockets
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Shape B
Sealing form 2 Cutting ring connection
Standard DIN 2353
ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name i mm L mm External pipe Ø mm Operating pressure AF mm G1 Series Ø d2 mm
Product Name i mm L mm External pipe Ø mm Operating pressure AF mm G1 Series Ø d2 mm
NVR NW 06 L VA 12 Screw-in sockets; Stainless steel 39.0 8 PN 315 19 G 1/4" -19 L 8
NVR NW 03 S VA 12 Screw-in sockets; Stainless steel 39.0 6 PN 630 19 G 1/4" -19 S 6
NVR NW 04 S VA 12 Screw-in sockets; Stainless steel 39.0 8 PN 630 19 G 1/4" -19 S 8
NVR NW 06 S VA 12 Screw-in sockets; Stainless steel 44.0 10 PN 630 22 G 3/8" -19 S 10
NVR NW 08 S VA 12 Screw-in sockets; Stainless steel 44.0 12 PN 630 22 G 3/8" -19 S 12
NVR NW 10 S VA 14 Screw-in sockets; Stainless steel 50.5 14 PN 630 27 G 1/2" -14 S 14
NVR NW 13 S VA 14 Screw-in sockets; Stainless steel 51.0 16 PN 400 27 G 1/2" -14 S 16
NVR NW 16 S VA 16 Screw-in sockets; Stainless steel 59.0 20 PN 400 32 G 3/4" -14 S 20
NVR NW 20 S VA 18 Screw-in sockets; Stainless steel 66.0 25 PN 400 41 G 1" -11 S 25
NVR NW 25 S VA 20 Screw-in sockets; Stainless steel 71.0 30 PN 250 50 G 1.1/4" -11 S 30
NVR NW 32 S VA 22 Screw-in sockets; Stainless steel 82.0 38 PN 250 55 G 1.1/2" -11 S 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
Ø d2 = External pipe diameter
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.