NW

Wiper NW



Properties

Application Hydraulics
Design Wipers
Media Mineral oils
Material Wiper: PA + MoS2
Installation press wiper into the locating groove

Description

Easy assembly.
Simple solution.
High abrasion resistance.

Hints

Tolerance: d= h11; D= +0.2/0; L= +0.25 / 0; C +0.1/0

Article Table

Product Name d mm D mm L mm C mm
Product Name d mm D mm L mm C mm
NW 500 12,70 22,22 4,4 20,62
NW 16 16,00 26,00 4,5 24,50
NW 750 19,05 31,75 6,0 30,15
NW 20 20,00 33,00 6,0 31,50
NW 875 22,22 34,92 6,0 33,32
NW 25 25,00 38,00 6,0 36,50
NW 1000 25,40 38,10 6,0 36,50
NW 1125 28,57 41,27 6,0 99,70
NW 1250 31,80 44,45 6,0 72,29
NW 1500 38,10 50,80 6,0 49,20
NW 1750 44,45 57,15 6,0 52,37
NW 50 50,00 63,00 6,0 61,50
NW 2000 50,80 63,50 6,0 61,90
NW 2500 63,50 76,20 6,0 74,60
NW 2750 69,85 82,55 6,0 80,65
NW 70 70,00 83,00 6,0 81,50
NW 3000 76,20 88,90 6,0 87,30

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.