NY 300

Thermoplastic high pressure hose

  • Image_1 Image_1

Properties

Application area High pressure hydraulic systems
hydraulic tools
Compressors
Colour black
Inner layer Polyamid (PA)
Insert Two high tensile steel wire spiral inserts and one steel wire braid
Media Mineral oil
Applications with gaseous and aggressive media
Synthetic oils
Outer layer up to NW 13: Polyurethane; from NW 16: Polyamide
Special features high kink resistance
maximum flexibility
Standard Pressure values from EN 853, SAE 100 R9, SAE 100 R10
Temp. max. 100 °C
Temp. min. -40 °C

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm DN* Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm DN* Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
NY 306 12.5 6.3 6 450 1/4" 1800 4 70
NY 308 14.3 8.2 8 400 5/16" 1600 5 100
NY 310 17.0 9.7 10 375 3/8" 1500 6 120
NY 313 20.7 12.8 12 350 1/2" 1400 8 165
NY 316 24.5 16.0 16 330 5/8" 1320 10 200
NY 320 28.5 19.6 19 300 3/4" 1200 12 240
NY 325 34.0 25.0 25 275 1" 1100 16 280
NY 332 44.0 32.0 31 275 1.1/4" 1100 20 400
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.