NY 700 (R7)

Thermoplastic high pressure hose


Properties

Outer layer Polyurethane
Special features high ozone and abrasion resistance, no swelling or brittleness when used with solvents or alkaline media, slight volumetric expansion, very good reverse bending fatigue strength
Insert two high tensile polyester braided inserts
Application Forklift trucks, Lubrication line, medium high pressure systems
Colour black
Inner layer Polyester elastomer
Elongation + 3 % to - 3 %
Media ASTM1, ASTM3, Mineral oil, Polyglycol based oil, Synthetic oils, Water (0°C to + 60°C), Water-oil emulsions (up to 60‏°C)
Standard SAE 100 R 7

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Min. bending radius mm
NY 704 5 3 3/16" 5,0 9,6 210,0 840 25
NY 706 6 4 1/4" 6,5 12,2 210,0 840 35
NY 708 8 5 5/16" 8,1 14,3 190,0 760 45
NY 710 10 6 3/8" 9,7 16,0 160,0 640 55
NY 713 12 8 1/2" 13,0 20,3 140,0 560 95
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.