NYZ 100

Thermoplastic high pressure twin hose


Properties

Outer layer Polyurethane
Special features good chemical resistance, high ozone and abrasion resistance, low volumetric expansion
Insert one high tensile steel wire braided insert
Application Agricultural machines, Forklift trucks, High pressure lubrication lines, medium high pressure circuits
Colour black
Inner layer Polyester elastomer
Elongation + 2 % to - 4 %
Media Mineral oil, Polyglycol based oil, Water (0°C to + 60°C), Water-oil emulsions (up to 60‏°C)

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Min. bending radius mm
NYZ 104 5 3 3/16" 5 9,3 300,0 1200 25
NYZ 106 6 4 1/4" 6 11,5 300,0 1200 35
NYZ 108 8 5 5/16" 8 13,3 225,0 900 40
NYZ 110 10 6 3/8" 10 15,0 225,0 900 60
NYZ 113 12 8 1/2" 12 18,3 180,0 655 70
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.