NYZ 2100

Thermoplastic high pressure twin hose


Properties

Outer layer Polyurethane
Special features Extremely kink-resistant hose, good flexibility at low temperatures, Twin hose
Insert one aramide braided insert and one high tensile steel wire braided insert
Application emergency rescue systems, Extreme pressure applications, high pressure tools, The jaws of life
Inner layer Polyester elastomer
Media Mineral oil, Synthetic oils, Water (0°C to + 60°C), Water-oil emulsions (up to 60‏°C)

Article Table

Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Min. bending radius mm Colour
Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Min. bending radius mm Colour
NYZ 2106 B 6 4 1/4" 6,3 13,3 700,0 2800 70 blue
NYZ 2106 BGE 6 4 1/4" 6,3 13,3 700,0 2800 70 blue + yellow
NYZ 2106 BR 6 4 1/4" 6,3 13,3 700,0 2800 70 blue + red
NYZ 2106 GE 6 4 1/4" 6,3 13,3 700,0 2800 70 yellow
NYZ 2106 R 6 4 1/4" 6,3 13,3 700,0 2800 70 red
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.