O-Ringschnur 70° Shore NBR

O-ring cord, 70SH NBR



Properties

Design O-ring cord
Colour black
Media Oxygen, Ozone, resistant to mineral oils and greases
Material NBR 70 Shore A

Article Table

Product Name S mm Tolerance
Product Name S mm Tolerance
OR SCHNUR 1.5 1,50 +/- 0.20 mm
OR SCHNUR 1.6 1,60 +/- 0.20 mm
OR SCHNUR 1.78 1,78 +/- 0.20 mm
OR SCHNUR 2 2,00 +/- 0.20 mm
OR SCHNUR 2.4 2,40 +/- 0.25 mm
OR SCHNUR 2.5 2,50 +/- 0.25 mm
OR SCHNUR 2.62 2,62 +/- 0.25 mm
OR SCHNUR 3 3,00 +/- 0.25 mm
OR SCHNUR 3.2 3,20 +/- 0.35 mm
OR SCHNUR 3.5 3,50 +/- 0.35 mm
OR SCHNUR 3.53 3,53 +/- 0.35 mm
OR SCHNUR 4 4,00 +/- 0.35 mm
OR SCHNUR 4.5 4,50 +/- 0.40 mm
OR SCHNUR 5 5,00 +/- 0.40 mm
OR SCHNUR 5.33 5,33 +/- 0.40 mm
OR SCHNUR 5.5 5,50 +/- 0.40 mm
OR SCHNUR 5.7 5,70 +/- 0.40 mm
OR SCHNUR 6 6,00 +/- 0.40 mm
OR SCHNUR 6.35 6,35 +/- 0.55 mm
OR SCHNUR 6.5 6,50 +/- 0.55 mm
OR SCHNUR 7 7,00 +/- 0.55 mm
OR SCHNUR 7.5 7,50 +/- 0.55 mm
OR SCHNUR 8 8,00 +/- 0.55 mm
OR SCHNUR 8.4 8,40 +/- 0.55 mm
OR SCHNUR 8.5 8,50 +/- 0.55 mm
OR SCHNUR 9 9,00 +/- 0.55 mm
OR SCHNUR 9.5 9,50 +/- 0.55 mm
OR SCHNUR 10 10,00 +/- 0.65 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.