PA 500 AJ 45 VA

Swage fitting, DKJ angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 500 hoses
Connection 1 UN/UNF nut threads
Integration with pull-out protection (interlock)
Material Stainless steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 74° inner cone
Short code DKJ
Standard ISO 8434-2

Article Table

Product Name L2 mm S1 G1 DN Inches Size
Product Name L2 mm S1 G1 DN Inches Size
PA 520 AJ 45 VA 37.5 Swage fitting, DKJ angle 45°; Stainless steel 32 1.1/16" -12 UN 19 3/4" 12
PA 520 AJ 25 45 VA 43.5 Swage fitting, DKJ angle 45°; Stainless steel 41 1.5/16" -12 UN 19 3/4" 12
PA 525 AJ 45 VA 47.0 Swage fitting, DKJ angle 45°; Stainless steel 41 1.5/16" -12 UN 25 1" 16
PA 525 AJ 32 45 VA 51.0 Swage fitting, DKJ angle 45°; Stainless steel 50 1.5/8" -12 UN 25 1" 16
PA 532 AJ 45 VA 49.0 Swage fitting, DKJ angle 45°; Stainless steel 50 1.5/8" -12 UN 31 1.1/4" 20
PA 532 AJ 40 45 VA 52.0 Swage fitting, DKJ angle 45°; Stainless steel 60 1.7/8" -12 UN 31 1.1/4" 20
PA 540 AJ 45 VA 50.0 Swage fitting, DKJ angle 45°; Stainless steel 60 1.7/8" -12 UN 38 1.1/2" 24
PA 540 AJ 50 45 VA - Swage fitting, DKJ angle 45°; Stainless steel 70 2.1/2" -12 UN 38 1.1/2" 24
PA 550 AJ 45 VA 78.0 Swage fitting, DKJ angle 45°; Stainless steel 70 2.1/2" -12 UN 51 2" 32
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.