PA 500 AOB 90 A

Swage fitting, DKOR angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 500 hoses
Connection 1 BSP nut thread
Integration with pull-out protection (interlock)
Material Steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 60° outer cone with O-ring
Short code DKOR
Standard ISO 8434-6
BS 5200
Surface electro galvanised

Article Table

Product Name L1 mm L2 mm S1 OR G1 DN Inches Size
Product Name L1 mm L2 mm S1 OR G1 DN Inches Size
PA 532 AOB 90 A 182.0 106.5 Swage fitting, DKOR angle 90°; Steel 50 29.1 x 1.6 G 1.1/4" -11 31 1.1/4" 20
PA 540 AOB 90 A 215.5 123.5 Swage fitting, DKOR angle 90°; Steel 60 35.1 x 1.6 G 1.1/2" -11 38 1.1/2" 24
PA 550 AOB 90 A 250.5 146.0 Swage fitting, DKOR angle 90°; Steel 70 48.1 x 1.6 G 2" -11 51 2" 32
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.