PA 500 AOJ 45 A

Swage fitting, DKOJ angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 500 hoses
Connection 1 UN/UNF nut threads
Integration with pull-out protection (interlock)
Material Steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 74° inner cone with O-ring
Short code DKOJ
Standard ISO 8434-2
Surface electro galvanised

Article Table

Product Name L1 mm L2 mm S1 Operating pressure bar G1 Inches DN OR Size
Product Name L1 mm L2 mm S1 Operating pressure bar G1 Inches DN OR Size
PA 532 AOJ 45 A 199.0 49.5 50 420.0 1.5/8" -12 UN 1.1/4" 31 31.47 x 1.78 20
PA 540 AOJ 45 A 233.0 58.0 55 420.0 1.7/8" -12 UN 1.1/2" 38 37.82 x 1.78 24
PA 550 AOJ 45 A 275.0 64.0 75 345.0 2.1/2" -12 UN 2" 51 50.00 x 2.00 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.