PA 500 SF 45 VA

Swage fitting, SFL angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 500 hoses
Connection 1 SAE flange connection 3000 PSI
Integration with pull-out protection (interlock)
Material Stainless steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 flat seal with SF O-ring
Short code SFL
Standard SAE J 518
ISO 6162-1

Article Table

Product Name L2 mm D mm H mm DN Flange size Inches Size
Product Name L2 mm D mm H mm DN Flange size Inches Size
PA 520 SF 45 VA 38.0 Swage fitting, SFL angle 45°; Stainless steel 38.1 6.7 19 3/4" 3/4" 12
PA 520 SF 25 45 VA 39.5 Swage fitting, SFL angle 45°; Stainless steel 44.5 8.0 19 1" 3/4" 12
PA 525 SF 45 VA 39.0 Swage fitting, SFL angle 45°; Stainless steel 44.5 8.0 25 1" 1" 16
PA 525 SF 32 45 VA 44.0 Swage fitting, SFL angle 45°; Stainless steel 50.8 8.0 25 1.1/4" 1" 16
PA 532 SF 45 VA 45.0 Swage fitting, SFL angle 45°; Stainless steel 50.8 8.0 31 1.1/4" 1.1/4" 20
PA 532 SF 40 45 VA 46.0 Swage fitting, SFL angle 45°; Stainless steel 60.3 8.0 31 1.1/2" 1.1/4" 20
PA 540 SF 45 VA 49.0 Swage fitting, SFL angle 45°; Stainless steel 60.3 8.0 38 1.1/2" 1.1/2" 24
PA 540 SF 50 45 VA 60.0 Swage fitting, SFL angle 45°; Stainless steel 71.4 9.5 38 2" 1.1/2" 24
PA 550 SF 45 VA 65.0 Swage fitting, SFL angle 45°; Stainless steel 71.4 9.5 51 2" 2" 32
DN = Nominal diameter, nominal width

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.