PA 500 SF6 A

Swage fitting, SFS

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 500 hoses
Connection 1 SAE flange connection 6000 PSI
Integration with pull-out protection (interlock)
Lieferumfang Swage nipple + swage ferrule
Material Steel
Sealing form 1 flat seal with SF O-ring
Short code SFS
Standard ISO 6162-2, SAE J518
Surface electro galvanised

Article Table

Product Name H mm L1 mm D mm Flanschgröße Zoll DN Size
Product Name H mm L1 mm D mm Flanschgröße Zoll DN Size
PA532SF625A 9.6 mm 149.0 mm 47.6 mm 1" 1.1/4" 31 20
PA532SF6A 10.4 mm 162.5 mm 54.0 mm 1.1/4" 1.1/4" 31 20
PA532SF640A 12.7 mm 167.0 mm 63.5 mm 1.1/2" 1.1/4" 31 20
PA540SF632A 10.4 mm 162.0 mm 54.0 mm 1.1/4" 1.1/2" 38 24
PA540SF6A 12.7 mm 183.5 mm 63.5 mm 1.1/2" 1.1/2" 38 24
PA540SF650A 12.7 mm 188.0 mm 79.4 mm 2" 1.1/2" 38 24
PA550SF6A 12.7 mm 202.0 mm 79.4 mm 2" 2" 51 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.