PA 700 AJF

Swage fitting, ORFS

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 400 hoses
Connection 1 UN/UNF nut threads
Integration with pull-out protection (interlock)
Material Steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 Flat seal
Short code ORFS
Standard ISO 8434-3
Surface electro galvanised

Article Table

Product Name L1 mm S1 Operating pressure bar G1 Inches DN Size
Product Name L1 mm S1 Operating pressure bar G1 Inches DN Size
PA 713 AJF 65.8 27 413.0 13/16" -16 UN 1/2" 12 8
PA 716 AJF 82.0 30 413.0 1" -14 UNS 5/8" 16 10
PA 716 AJF 20 82.0 36 413.0 1.3/16" -12 UN 5/8" 16 10
PA 720 AJF 94.5 36 413.0 1.3/16" -12 UN 3/4" 19 12
PA 720 AJF 25 98.0 41 413.0 1.7/16" -12 UN 3/4" 19 12
PA 725 AJF 108.5 41 413.0 1.7/16" -12 UN 1" 25 16
PA 725 AJF 32 130 - 257.0 1.11/16" -12 UN 1 25 16
PA 732 AJF 115.5 50 275.0 1.11/16" -12 UN 1.1/4" 31 20
PA 740 AJF 127.5 60 275.0 2" -12 UN 1.1/2" 38 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.