PA 700 AOB VA

Swage fitting, DKOR

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 700 hoses
Connection 1 BSP nut thread
Integration with pull-out protection (interlock)
Material Stainless steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 60° outer cone with O-ring
Short code DKOR
Standard ISO 8434-6
BS 5200

Article Table

Product Name S1 Operating pressure bar G1 Inches DN OR Size
Product Name S1 Operating pressure bar G1 Inches DN OR Size
PA 720 AOB VA 32 350.0 G 3/4" -14 3/4" 19 17.1 x 1.6 12
PA 725 AOB VA 41 280.0 G 1" -11 1" 25 22.1 x 1.6 16
PA 732 AOB VA 50 250.0 G 1.1/4" -11 1.1/4" 31 29.1 x 1.6 20
PA 740 AOB VA 60 210.0 G 1.1/2" -11 1.1/2" 38 35.1 x 1.6 24
DN = Nenndurchmesser, Nennweite

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.