PA 700 AOS

Swage fitting, DKOS

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 400 hoses
Connection 1 metric nut thread
Integration with pull-out protection (interlock)
Material Steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 24° outer cone with O-ring
Series heavy
Short code DKOS
Standard ISO 8434-1
Surface electro galvanised

Article Table

Product Name L1 mm S1 OR Operating pressure bar G1 for external pipe Ø mm DN Inches Size
Product Name L1 mm S1 OR Operating pressure bar G1 for external pipe Ø mm DN Inches Size
PA 710 AOS 08 - Swage fitting, DKOS; Steel 24 10.0 x 1.5 630.0 M 20 x 1.5 - 10 3/8" 6
PA 710 AOS 67.6 Swage fitting, DKOS; Steel 27 12.0 x 2.0 630.0 M 22 x 1.5 14 10 3/8" 6
PA 713 AOS 72.8 Swage fitting, DKOS; Steel 30 13.0 x 2.0 420.0 M 24 x 1.5 16 12 1/2" 8
PA 713 AOS 16 75.8 Swage fitting, DKOS; Steel 36 17.5 x 2.5 420.0 M 30 x 2 20 12 1/2" 8
PA 716 AOS 13 83.5 Swage fitting, DKOS; Steel 30 13.0 x 2.0 420.0 M 24 x 1.5 16 16 5/8" 10
PA 716 AOS 86.0 Swage fitting, DKOS; Steel 36 17.5 x 2.5 420.0 M 30 x 2 20 16 5/8" 10
PA 716 AOS 20 89.0 Swage fitting, DKOS; Steel 41 20.0 x 2.5 420.0 M 36 x 2 25 16 5/8" 10
PA 720 AOS 16 96.0 Swage fitting, DKOS; Steel 36 16.0 x 2.5 420.0 M 30 x 2 20 19 3/4" 12
PA 720 AOS 99.0 Swage fitting, DKOS; Steel 46 20.0 x 2.5 420.0 M 36 x 2 25 19 3/4" 12
PA 720 AOS SW41 99.0 Swage fitting, DKOS; Steel 41 20.0 x 2.5 420.0 M 36 x 2 25 19 3/4" 12
PA 720 AOS 25 100.0 Swage fitting, DKOS; Steel 50 25.0 x 2.5 420.0 M 42 x 2 30 19 3/4" 12
PA 725 AOS 20 112.0 Swage fitting, DKOS; Steel 46 20.0 x 2.5 420.0 M 36 x 2 25 25 1" 16
PA 725 AOS 113.0 Swage fitting, DKOS; Steel 50 25.0 x 2.5 420.0 M 42 x 2 30 25 1" 16
PA 725 AOS 32 131.0 Swage fitting, DKOS; Steel 60 33.0 x 2.5 420.0 M 52 x 2 38 25 1" 16
PA 732 AOS 25 120.0 Swage fitting, DKOS; Steel 50 25.0 x 2.5 420.0 M 42 x 2 30 31 1.1/4" 20
PA 732 AOS 124.5 Swage fitting, DKOS; Steel 60 33.0 x 2.5 420.0 M 52 x 2 38 31 1.1/4" 20
PA 740 AOS 32 136.5 Swage fitting, DKOS; Steel 60 33.0 x 2.5 420.0 M 52 x 2 38 38 1.1/2" 24
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.