PA 700 AOS 45

Swage fitting, DKOS angle 45°



Properties

Connection 1 metric nut thread
Series heavy
Sealing form 1 24° outer cone with O-ring
Integration with pull-out protection (interlock)
Application Swage fitting for HD 400 hoses
Scope of supply Swage nipple + swage ferrule
Standard ISO 8434-1
Short code DKOS
Surface electro galvanised
Material Steel

Article Table

Product Name DN Size Inches Operating pressure bar G1 for external pipe Ø mm S1 OR
Product Name DN Size Inches Operating pressure bar G1 for external pipe Ø mm S1 OR
PA 710 AOS 08 45 10 6 3/8" 630,0 M 20 x 1.5 12 24 10.0 x 1.5
PA 710 AOS 45 10 6 3/8" 630,0 M 22 x 1.5 14 27 12.0 x 2.0
PA 713 AOS 45 12 8 1/2" 420,0 M 24 x 1.5 16 30 13.0 x 2.0
PA 713 AOS 16 45 12 8 1/2" 420,0 M 30 x 2 20 36 17.5 x 2.5
PA 716 AOS 45 16 10 3/8" 420,0 M 30 x 2 20 36 17.5 x 2.5
PA 720 AOS 16 45 19 12 3/4" 420,0 M 30 x 2 20 36 16.0 x 2.5
PA 720 AOS 45 19 12 3/4" 420,0 M 36 x 2 25 46 20.0 x 2.5
PA 720 AOS 25 45 19 12 3/4" 420,0 M 42 x 2 30 50 27.0 x 2.5
PA 725 AOS 20 45 25 16 1" 420,0 M 36 x 2 25 41 20.0 x 2.5
PA 725 AOS 45 25 16 1" 420,0 M 42 x 2 30 50 25.0 x 2.5
PA 725 AOS 32 45 25 16 1" 420,0 M 52 x 2 38 60 33.0 x 2.5

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.