PA 700 SF

Swage fitting, SFL

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 400 hoses
Connection 1 SAE flange connection 3000 PSI
Integration with pull-out protection (interlock)
Material Steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 flat seal with SF O-ring
Short code SFL
Standard SAE J518
ISO 6162-1
Surface electro galvanised

Article Table

Product Name H mm L1 mm D mm Flange size Operating pressure bar Inches DN Size
Product Name H mm L1 mm D mm Flange size Operating pressure bar Inches DN Size
PA 713 SF 6.7 90.4 30.2 1/2" 350.0 1/2" 12 8
PA 713 SF 20 6.7 91.6 38.1 3/4" 350.0 1/2" 12 8
PA 716 SF 20 6.7 102.6 38.1 3/4" 350.0 3/8" 16 10
PA 720 SF 6.8 116.5 38.1 3/4" 350.0 3/4" 19 12
PA 720 SF 25 8.1 119.5 44.5 1" 320.0 3/4" 19 12
PA 725 SF 20 6.8 132.0 38.1 3/4" 320.0 1" 25 16
PA 725 SF 8.1 135.5 44.5 1" 320.0 1" 25 16
PA 725 SF 32 8.1 138.5 50.8 1.1/4" 280.0 1" 25 16
PA 732 SF 25 8.1 145.0 44.5 1" 280.0 1.1/4" 31 20
PA 732 SF 8.1 148.5 50.8 1.1/4" 280.0 1.1/4" 31 20
PA 732 SF 40 8.1 151.5 60.3 1.1/2" 210.0 1.1/4" 31 20
PA 740 SF 32 8.1 158.0 50.8 1.1/4" 210.0 1.1/2" 38 24
PA 740 SF 8.1 166.5 60.3 1.1/2" 210.0 1.1/2" 38 24
PA 740 SF 50 9.6 169.5 71.4 2" 210.0 1.1/2" 38 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.