PA 700 SF 45

Swage fitting, SFL angle 45°



Properties

Connection 1 SAE flange connection 3000 PSI
Sealing form 1 flat seal with SF O-ring
Integration with pull-out protection (interlock)
Application Swage fitting for HD 700 hoses
Scope of supply Swage nipple + swage ferrule
Standard ISO 6162-1, SAE J518
Short code SFL
Surface electro galvanised
Material Steel

Article Table

Product Name DN Size Inches Flange size Operating pressure bar D mm H mm L1 mm L2 mm
Product Name DN Size Inches Flange size Operating pressure bar D mm H mm L1 mm L2 mm
PA 713 SF 45 12 8 1/2" 1/2" 350,0 30,2 6,7 94,5 22,5
PA 713 SF 20 45 12 8 1/2" 3/4" 350,0 38,1 6,7 126,0 26,5
PA 720 SF 45 19 12 3/4" 3/4" 350,0 38,1 6,8 132,5 27,5
PA 720 SF 25 45 19 12 3/4" 1" 320,0 44,5 8,1 134,5 29,5
PA 725 SF 20 45 25 16 1" 3/4" 320,0 38,1 6,8 153,0 30,0
PA 725 SF 45 25 16 1" 1" 320,0 44,5 8,1 159,0 28,5
PA 725 SF 32 45 25 16 1" 1.1/4" 280,0 50,8 8,1 161,0 30,5
PA 732 SF 25 45 S 31 20 1.1/4" 1" 280,0 44,5 8,0 170,5 35,0
PA 732 SF 45 S 31 20 1.1/4" 1.1/4" 280,0 50,8 8,0 181,5 41,5
PA 732 SF 40 45 S 31 20 1.1/4" 1.1/2" 210,0 60,3 8,0 188,0 43,5
PA 740 SF 32 45 38 24 1.1/2" 1.1/4" 210,0 50,8 8,1 199,5 42,0
PA 740 SF 45 38 24 1.1/2" 1.1/2" 210,0 60,3 8,1 212,5 41,5
PA 740 SF 50 45 38 24 1.1/2" 2" 210,0 71,4 9,6 233,5 58,5

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.