PA 700 SF6 90

Swage fitting, SFS angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 400 hoses
Connection 1 SAE flange connection 6000 PSI
Integration with pull-out protection (interlock)
Material Steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 flat seal with SF O-ring
Short code SFS
Standard SAE J 518
ISO 6162-2
Surface electro galvanised

Article Table

Product Name L1 mm L2 mm D mm Operating pressure bar H mm DN Flange size Inches Size Weight kg
Product Name L1 mm L2 mm D mm Operating pressure bar H mm DN Flange size Inches Size Weight kg
PA 713 SF6 90 86.0 46.0 Swage fitting, SFS angle 90°; Steel 31.8 420.0 7.7 12 1/2" 1/2" 8 0.020
PA 713 SF6 20 90 92.5 46.0 Swage fitting, SFS angle 90°; Steel 41.3 420.0 8.8 12 3/4" 1/2" 8 0.020
PA 716 SF6 13 90 108.0 48.0 Swage fitting, SFS angle 90°; Steel 31.8 420.0 7.7 16 1/2" 5/8" 10 0.292
PA 716 SF6 20 90 107.5 52.5 Swage fitting, SFS angle 90°; Steel 41.3 420.0 8.8 16 3/4" 5/8" 10 0.364
PA 716 SF6 25 90 108.0 57.0 Swage fitting, SFS angle 90°; Steel 47.6 420.0 9.5 16 1" 5/8" 10 0.432
PA 720 SF6 13 90 L 80 117.0 80.0 Swage fitting, SFS angle 90°; Steel 31.8 420.0 7.8 19 1/2" 3/4" 12 0.280
PA 720 SF6 13 90 L 100 117.0 100.0 Swage fitting, SFS angle 90°; Steel 31.8 420.0 7.8 19 1/2" 3/4" 12 0.273
PA 720 SF6 90 127.5 62.0 Swage fitting, SFS angle 90°; Steel 41.3 420.0 8.8 19 3/4" 3/4" 12 0.578
PA 720 SF6 90 L 52 127.5 52.0 Swage fitting, SFS angle 90°; Steel 41.3 420.0 8.8 19 3/4" 3/4" 12 0.450
PA 720 SF6 90 L 80 127.5 80.0 Swage fitting, SFS angle 90°; Steel 41.3 420.0 8.8 19 3/4" 3/4" 12 0.450
PA 720 SF6 90 L 85 127.5 85.0 Swage fitting, SFS angle 90°; Steel 41.3 420.0 8.8 19 3/4" 3/4" 12 0.450
PA 720 SF6 90 L 100 127.5 100.0 Swage fitting, SFS angle 90°; Steel 41.3 420.0 8.8 19 3/4" 3/4" 12 0.663
PA 720 SF6 90 L 150 127.5 150.0 Swage fitting, SFS angle 90°; Steel 41.3 420.0 8.8 19 3/4" 3/4" 12 0.550
PA 720 SF6 25 90 127.5 63.5 Swage fitting, SFS angle 90°; Steel 47.6 420.0 9.6 19 1" 3/4" 12 0.669
PA 720 SF6 32 90 125 69 Swage fitting, SFS angle 90°; Steel 54.0 420.0 10.4 19 1.1/4" 3/4" 12 0.669
PA 725 SF6 20 90 152.5 70.5 Swage fitting, SFS angle 90°; Steel 41.3 420.0 8.8 25 3/4" 1" 16 0.838
PA 725 SF6 90 158.0 74.0 Swage fitting, SFS angle 90°; Steel 47.6 420.0 9.6 25 1" 1" 16 0.954
PA 725 SF6 90 L 100 158.0 100.0 Swage fitting, SFS angle 90°; Steel 47.6 420.0 9.6 25 1" 1" 16 0.750
PA 725 SF6 90 L 200 158.0 200.0 Swage fitting, SFS angle 90°; Steel 47.6 420.0 9.6 25 1" 1" 16 0.950
PA 725 SF6 32 90 156.0 83.5 Swage fitting, SFS angle 90°; Steel 54.0 420.0 10.4 25 1.1/4" 1" 16 1.098
PA 732 SF6 25 90 173.0 95.0 Swage fitting, SFS angle 90°; Steel 47.6 420.0 9.6 31 1" 1.1/4" 20 1.350
PA 732 SF6 90 182.0 93.0 Swage fitting, SFS angle 90°; Steel 54.0 420.0 10.4 31 1.1/4" 1.1/4" 20 1.440
PA 732 SF6 90 L 120 182.0 120.0 Swage fitting, SFS angle 90°; Steel 54.0 420.0 10.4 31 1.1/4" 1.1/4" 20 1.100
PA 732 SF6 40 90 182.0 101.5 Swage fitting, SFS angle 90°; Steel 63.5 420.0 12.6 31 1.1/2" 1.1/4" 20 1.830
PA 740 SF6 32 90 193.0 100.0 Swage fitting, SFS angle 90°; Steel 54.0 420.0 10.3 38 1.1/4" 1.1/2" 24 2.052
PA 740 SF6 90 213.5 110.0 Swage fitting, SFS angle 90°; Steel 63.5 420.0 12.6 38 1.1/2" 1.1/2" 24 2.699
PA 740 SF6 50 90 215.5 126.0 Swage fitting, SFS angle 90°; Steel 79.4 420.0 12.6 38 2" 1.1/2" 24 3.340
PA 750 SF6 90 268.0 138.0 Swage fitting, SFS angle 90°; Steel 79.4 420.0 12.6 51 2" 2" 32 4.822
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.