PA 700 SF6 VA

Swage fitting, SFS

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 700 hoses
Connection 1 SAE flange connection 6000 PSI
Integration with pull-out protection (interlock)
Material Stainless steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 flat seal with SF O-ring
Short code SFS
Standard ISO 6162-2
SAE J 518

Article Table

Product Name D mm Operating pressure bar H mm DN Flange size Inches Size Weight kg
Product Name D mm Operating pressure bar H mm DN Flange size Inches Size Weight kg
PA 720 SF6 VA Swage fitting, SFS; Stainless steel 41.3 420.0 8.8 19 3/4" 3/4" 12 0.273
PA 720 SF6 25 VA Swage fitting, SFS; Stainless steel 47.6 420.0 9.5 19 1" 3/4" 12 0.441
PA 725 SF6 VA Swage fitting, SFS; Stainless steel 47.6 420.0 9.5 25 1" 1" 16 0.610
PA 732 SF6 VA Swage fitting, SFS; Stainless steel 54.0 420.0 10.3 31 1.1/4" 1.1/4" 20 0.946
PA 732 SF6 40 VA Swage fitting, SFS; Stainless steel 63.5 420.0 12.6 31 1.1/2" 1.1/4" 20 1.115
PA 740 SF6 VA Swage fitting, SFS; Stainless steel 63.5 420.0 12.6 38 1.1/2" 1.1/2" 24 1.283
PA 740 SF6 50 VA Swage fitting, SFS; Stainless steel 79.4 420.0 12.6 38 2" 1.1/2" 24 1.451
DN = Nominal diameter, nominal width

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.