PA 800 AOS 45

Swage fitting, DKOS angle 45°



Properties

Connection 1 metric nut thread
Sealing form 1 24° outer cone with O-ring
Integration with pull-out protection (interlock)
Application Swage fitting for HD 800 hoses
Scope of supply Swage nipple + swage ferrule
Standard ISO 8434-1
Short code DKOS
Surface electro galvanised
Material Steel

Hints

Added innovative and unique new O-ring seal 27,3mm x 2,4mm (Material:EPDM)to the -20 size nipples. The O-ring design prevents fluid migration thus providing zero leakage as measured to SAE and EN specifications

Article Table

Product Name DN* Size Inches G1 for external pipe Ø mm L1 mm L2 mm S1 Operating pressure bar OR
Product Name DN* Size Inches G1 for external pipe Ø mm L1 mm L2 mm S1 Operating pressure bar OR
PA 816 AOS 45 16 10 3/8" M 30 x 2 20 112,8 31,0 36 500,0 17.5 x 2.5
PA 816 AOS 20 45 16 10 3/8" M 36 x 2 25 - 32,0 46 500,0 20.0 x 2.5
PA 820 AOS 16 45 19 12 3/4" M 30 x 2 20 124,4 28,2 36 420,0 17.5 x 2.5
PA 820 AOS 45 19 12 3/4" M 36 x 2 25 135,1 32,0 46 500,0 20.0 x 2.5
PA 825 AOS 20 45 25 16 1" M 36 x 2 25 145,7 32,9 41 420,0 20.0 x 2.5
PA 825 AOS 45 25 16 1" M 42 x 2 30 163,6 35,0 50 500,0 25.0 x 2.5
PA 832 AOS 45 31 20 1.1/4" M 52 x 2 38 190,0 39,0 60 500,0 33.0 x 2.5

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.