PA 800 AOS 90

Swage fitting, DKOS angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage fitting for HD 800 hoses
Connection 1 metric nut thread
Integration with pull-out protection (interlock)
Lieferumfang Swage nipple + swage ferrule
Material Steel
Sealing form 1 24° outer cone with O-ring
Short code DKOS
Standard ISO 8434-1
Surface electro galvanised

Hints

Für eine verbesserte Abdichtung wird die Armatur in size-20 [DN31] mit 2 O-Ringen 27,3mm x 2,4mm (Material:EPDM)verarbeitet.
Damit wird eine Dichtheit mit Leckageklasse 0 der Schlauch-, Armaturenverbindung erreicht.

Article Table

Product Name DN* L2 mm S1 Betriebsdruck bar G1 für Rohr-Außen-Ø mm Zoll OR Size L1 mm
Product Name DN* L2 mm S1 Betriebsdruck bar G1 für Rohr-Außen-Ø mm Zoll OR Size L1 mm
PA816AOS90 16 61.5 mm 36 500.0 bar M 30 x 2 20 mm 5/8" 17.5 x 2.5 10 99.2 mm
PA816AOS2090 16 65.0 mm 46 500.0 bar M 36 x 2 25 mm 5/8" 20.0 x 2.5 10 -
PA820AOS1690 19 54.0 mm 36 420.0 bar M 30 x 2 20 mm 3/4" 17.5 x 2.5 12 110.4 mm
PA820AOS90 19 65.0 mm 46 500.0 bar M 36 x 2 25 mm 3/4" 20.0 x 2.5 12 124.8 mm
PA825AOS2090 25 74.0 mm 41 420.0 bar M 36 x 2 25 mm 1" 20.0 x 2.5 16 144.2 mm
PA825AOS90 25 76.0 mm 50 500.0 bar M 42 x 2 30 mm 1" 25.0 x 2.5 16 155.6 mm
PA832AOS90 31 89.0 mm 60 500.0 bar M 52 x 2 38 mm 1.1/4" 33.0 x 2.5 20 185.0 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.