PN 02 FL 90

Swage nipple, BEL angle 90°



Properties

Connection 1 Pipe sockets
Series light
Sealing form 1 Cutting ring connection
Application Measuring equipment
Standard ISO 8434-1
Short code BEL
Surface electro galvanised
Material Steel

Hints

Appropriate ferrule: PMH 102.
Do not use for new designs; we recommend: PN 02 AOL...90.
Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).

Article Table

Product Name DN Size Inches Ø D2 mm L1 mm L2 mm
Product Name DN Size Inches Ø D2 mm L1 mm L2 mm
PN 02 FL 90 2 1 5/64" 4,0 33 25,5
PN 02 FL 04 90 2 1 5/64" 6,0 32 28,0
PN 02 FL 06 90 2 1 5/64" 8,0 41 37,0
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.