PN A 45 VA

Swage nipple, DKM angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 metric nut thread
Material Stainless steel
Sealing form 1 60° sealing head
Short code DKM
Standard DIN 3863

Hints

Die passende Fassung bitte nach dem Schlauchtyp auswählen.

Article Table

Product Name L2 mm S1 Betriebsdruck bar G1 Zoll DN Size
Product Name L2 mm S1 Betriebsdruck bar G1 Zoll DN Size
PN20A45VA 25.0 mm 36 63.0 bar M 30 x 1.5 3/4" 19 12
PN25A45VA 32.0 mm 46 63.0 bar M 38 x 1.5 1" 25 16
PN32A45VA 36.5 mm 55 63.0 bar M 45 x 1.5 1.1/4" 31 20
PN40A45VA 43.5 mm 60 63.0 bar M 45 x 2 1.1/2" 38 24
PN50A45VA 52.5 mm 70 40.0 bar M 65 x 2 2" 51 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.