PN AB 45 VA

Swage nipple, DKR angle 45°



Properties

Connection 1 BSP nut thread
Sealing form 1 60° outer cone
Application Swage nipple for HD 100 to HD 400, KP and TE hoses
Standard BS 5200, ISO 8434-6
Short code DKR
Material Stainless steel

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name DN Size Inches Operating pressure bar G1 L2 mm S1
Product Name DN Size Inches Operating pressure bar G1 L2 mm S1
PN 06 AB 02 45 VA 6 4 1/4" 350,0 G 1/8" -28 16,0 14
PN 06 AB 45 VA 6 4 1/4" 400,0 G 1/4" -19 14,5 17
PN 06 AB 10 45 VA 6 4 1/4" 400,0 G 3/8" -19 16,0 19
PN 08 AB 10 45 VA 8 5 5/16" 400,0 G 3/8" -19 15,0 19
PN 10 AB 06 45 VA 10 6 3/8" 400,0 G 1/4" -19 22,5 19
PN 10 AB 45 VA 10 6 3/8" 400,0 G 3/8" -19 15,0 19
PN 10 AB 13 45 VA 10 6 3/8" 250,0 G 1/2" -14 20,5 27
PN 13 AB 10 45 VA 12 8 1/2" 350,0 G 3/8" -19 25,5 22
PN 13 AB 45 VA 12 8 1/2" 350,0 G 1/2" -14 20,5 27
PN 13 AB 16 45 VA 12 8 1/2" 350,0 G 5/8" -14 29,0 27
PN 13 AB 20 45 VA 12 8 1/2" 315,0 G 3/4" -14 23,0 32
PN 16 AB 45 VA 16 10 5/8" 315,0 G 5/8" -14 28,0 27
PN 16 AB 20 45 VA 16 10 5/8" 315,0 G 3/4" -14 28,0 32
PN 20 AB 45 VA 19 12 3/4" 315,0 G 3/4" -14 30,0 32
PN 20 AB 25 45 VA 19 12 3/4" 250,0 G 1" -11 26,0 41
PN 25 AB 45 VA 25 16 1" 250,0 G 1" -11 39,5 41
PN 25 AB 32 45 VA 25 16 1" 160,0 G 1.1/4" -11 40,0 50
PN 32 AB 45 VA 31 20 1.1/4" 160,0 G 1.1/4" -11 40,0 50
PN 32 AB 40 45 VA 31 20 1.1/4" 125,0 G 1.1/2" -11 53,0 55
PN 40 AB 45 VA 38 24 1.1/2" 125,0 G 1.1/2" -11 55,0 55
PN 40 AB 50 45 VA 38 24 1.1/2" 80,0 G 2" -11 - 70
PN 50 AB 45 VA 51 32 2" 80,0 G 2" -11 57,0 70

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.