PN AB 90 VA

Swage nipple, DKR angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 BSP nut thread
Material Stainless steel
Sealing form 1 60° outer cone
Short code DKR
Standard ISO 8434-6
BS 5200

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L2 mm S1 Operating pressure bar G1 Inches DN Size
Product Name L2 mm S1 Operating pressure bar G1 Inches DN Size
PN 06 AB 02 90 VA 30.0 14 350.0 G 1/8" -28 1/4" 6 4
PN 06 AB 90 VA 28.0 17 400.0 G 1/4" -19 1/4" 6 4
PN 06 AB 10 90 VA 26.0 19 400.0 G 3/8" -19 1/4" 6 4
PN 08 AB 10 90 VA 34.0 19 400.0 G 3/8" -19 5/16" 8 5
PN 10 AB 06 90 VA 39.0 19 400.0 G 1/4" -19 3/8" 10 6
PN 10 AB 90 VA 34.0 19 400.0 G 3/8" -19 3/8" 10 6
PN 10 AB 13 90 VA 42.5 27 350.0 G 1/2" -14 3/8" 10 6
PN 13 AB 10 90 VA 47.5 22 350.0 G 3/8" -19 1/2" 12 8
PN 13 AB 90 VA 42.5 27 350.0 G 1/2" -14 1/2" 12 8
PN 13 AB 16 90 VA 50.5 27 350.0 G 5/8" -14 1/2" 12 8
PN 13 AB 20 90 VA 43.0 32 315.0 G 3/4" -14 1/2" 12 8
PN 16 AB 90 VA 54.0 27 350.0 G 5/8" -14 5/8" 16 10
PN 16 AB 20 90 VA 54.0 32 315.0 G 3/4" -14 5/8" 16 10
PN 20 AB 90 VA 54.0 32 315.0 G 3/4" -14 3/4" 19 12
PN 20 AB 25 90 VA 69.0 41 250.0 G 1" -11 3/4" 19 12
PN 25 AB 90 VA 69.0 41 250.0 G 1" -11 1" 25 16
PN 25 AB 32 90 VA 81.0 50 160.0 G 1.1/4" -11 1" 25 16
PN 32 AB 90 VA 81.0 50 160.0 G 1.1/4" -11 1.1/4" 31 20
PN 32 AB 40 90 VA 103.0 55 125.0 G 1.1/2" -11 1.1/4" 31 20
PN 40 AB 90 VA 102.0 55 125.0 G 1.1/2" -11 1.1/2" 38 24
PN 40 AB 50 90 VA - 70 80.0 G 2" -11 1.1/2" 38 24
PN 50 AB 90 VA 133.0 70 80.0 G 2" -11 2" 51 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.