PN ABK 45

Swage nipple, DKR Comp. angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 BSP nut thread
Construction type Compact form
Material Steel
Sealing form 1 60° outer cone
Short code DKR
Standard BS 5200
Surface electro galvanised

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm L2 mm S1 Operating pressure bar G1 DN Inches Size
Product Name L1 mm L2 mm S1 Operating pressure bar G1 DN Inches Size
PN 06 ABK 45 65.0 12.0 Swage nipple, DKR Comp. angle 45°; Steel; electro galvanised 19 400.0 G 1/4" -19 6 1/4" 4
PN 10 ABK 45 60.0 19.0 Swage nipple, DKR Comp. angle 45°; Steel; electro galvanised 22 400.0 G 3/8" -19 10 3/8" 6
PN 13 ABK 45 74.0 15.0 Swage nipple, DKR Comp. angle 45°; Steel; electro galvanised 27 350.0 G 1/2" -14 12 1/2" 8
PN 16 ABK 45 - - Swage nipple, DKR Comp. angle 45°; Steel; electro galvanised - 350.0 G 5/8" -14 16 5/8" 10
PN 20 ABK 45 - - Swage nipple, DKR Comp. angle 45°; Steel; electro galvanised - 315.0 G 3/4" -14 19 3/4" 12
PN 25 ABK 45 - - Swage nipple, DKR Comp. angle 45°; Steel; electro galvanised - 250.0 G 1" -11 25 1" 16
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.